48POINTERLASERMAGNIFY PAGEOFFPOWERONENTERMENUEXITR-CLICKUPDOWN Turning off the ProjectorTo turn off the projector:3. Projecting an Image (Basic Operation)1. Press the POWER (ON/STAND BY) button on the projectorcabinet or the POWER OFF button on the remote control.The "Power Off / Are you sure?" message will appear.2. Press the ENTER button or the POWER (ON/STANDBY) orthe POWER OFF button again.The POWER indicator will glow orange. After the projector turnsoff, the cooling fans keep operating for 90 seconds (Cooling-offtime).NOTE: Immediately after turning on the projector and displaying animage, you cannot turn off the projector for 60 seconds.3. Turn off the Main Power switch. The POWER indicator willgo out.CAUTIONDo not unplug the power cable from the wall outlet or donot turn off the main power under any one of the followingcircumstances.Doing so can cause damage to the projector or PC card:• While the projector lamp is On.• While the cooling fans are running. (The cooling fanscontinue to work for 90 seconds after the projector is turnedoff).• While the PC CARD Access Indicator lights. Doing so candamage your PC memory card.POWERENTERSELECTEXITSTATUSLAMPON/STAND BYAUTOADJUST3DREFORMPOINTERLASERMAGNIFY PAGEOFFPOWERONENTERMENUEXITR-CLICKUPDOWNPOWERENTERSELECTEXITSTATUSLAMPON/STAND BYAUTOADJUST3DREFORMCabinet controls Remote control
