17On ADJUST MODEThe ADJUST mode contains various adjustment items for set-up.Open the ADJUST menu and select the item you wish to adjust. Todisplay the ADJUST menu, proceed as follows:1 Press the ADJUST button.• The projector may ask for your passcode.2 Enter your registered passcode.When a passcode has not been registered:• Since no passcode is programmed at the factory, pressing theADJUST button will open the ADJUST menu.• See “Entering Passcode”, “Registering Passcode”, “ChangingYour Passcode” and “Canceling Your Passcode” on pages 61through 66.When your passcode has already been registered:• When finishing the ADJUST mode, the “RETURN USERMODE?” menu will be displayed. If you select “YES” andpress ENTER to end the ADJUST mode, you will have toenter your passcode to re-enter the ADJUST mode.• When finishing the ADJUST mode by either selecting “NO”or pressing END, you do not need to enter your passcode tore-enter the ADJUST mode. To exit the ADJUST modetemporarily during adjusting, select “NO”.P A S S C O D E ?****BEFORE SET-UP
