NEC XG85-XG135LC - 1 Manual

Also see for MultiSync XG-1352: Operation manual User manual

Contents

NEC XG85-XG135LC - 1 Manual Manual pdf 92 page image

92SETTINGDirect Entry Access SettingThis feature allows you to switch the current input directly to one ofthe registered inputs from NO1 to NO10 in the INPUT LIST.NOTE: To use this feature, hold down the CTL button and press oneof the INPUT buttons corresponding to the input number.To set this feature, proceed as follows:1 Press the ADJUST button to display the “ADJUST” menu.• The projector may ask you to enter your passcode.See page 61 for the explanation of the PASSCODE.2 Use the CURSOR or button to highlight the “8/OPTION”line. Press ENTER to display the “OPTION” menu. You can alsoselect the “OPTION” menu directly by pressing the INPUT “8”button.3 Use the CURSOR or button to highlight the “1/SETTINGMODE” line. Press ENTER to display the “SETTING MODE”menu. You can also select the “SETTING MODE” menu directlyby pressing the INPUT “1” button.4 Use the CURSOR or button to select the “DIRECT ENTRYACCESS” item on Page 3, then press ENTER to display the“DIRECT ENTRY ACCESS” menu.NOTE: The SETTING MODE has three menus. The “DIRECTENTRY ACCESS” item is on the third menu (P03).To access P03 from P01, press and hold down the CTL buttonthen press the button twice; to return to P01 from P03, pressand hold down the CTL button then press the button twice.– A D J U S T –1 / S I G N A L E N T R Y2 / F O C U S3 / A L I G N M E N T4 / C O N V E R G E N C E5 / K E L V I N6 / R , G , B G A I N7 / P A S S C O D E8 / O P T I O N9 / R E F . A D J U S T– O P T I O N –1 / S E T T I N G M O D E2 / M E N U M O D E3 / S E Q U E N C E R4 / P J A D D R E S S5 / V E R S I O N6 / H O U R M E T E R7 / D E F A U L T D A T AP03/P03 OPTION – SETTING MODE –B-FOCUS TRACKINGDISABLEOPTION TERM BAUD RATEOFF9600 BPSINPUT TERMINALRGB/COMPONENT SEARCHDIRECT ENTRY ACCESSMANUAL