NEC Xn120 Getting Started Manual

Also see for XN120 Vision: Advanced features guide User guide User guide User guide User manual

Contents

NEC Xn120 Getting Started Manual Manual pdf 34 page image

Configure the Xn12034 Xn120 Getting Started GuideRecall for Normal TelephonesYou may want to change this setting if: You have normal telephones connected and the RECALL key does not work correctly. This ishighlighted when you press the RECALL key but the call is not placed on hold. The RECALL is also referred to as Timed Break Recall (TBR).System Operation:The Xn120 must be configured with the correct RECALL timing that matches the normal telephones that youhave connected.Program 82-04-04Set the system to detect aRECALL duration of 70 to125mS (for normal UK timebreak recall operation).You will need to change threeoptions within this program.82-04-04=1382-04-07=1482-04-08=25Default Setting:The Xn120 will accept a RECALL duration of 105mS to 1000mSChange the setting to 13 (this is equivalent to 65mS).Press HOLD 3 times to confirm the entry and step to the nextoption.Change the setting to 14 (this is equivalent to 70mS).Press HOLD to confirm the entry and step to the next option.Change the setting to 25 (this is equivalent to 125mS).Press HOLD to confirm the entry and step to the next option.Press DC several times when you are done to return to theProgram Mode.(Press SPK to save changes and exit if you are finished).Configuration Sheet: RECALL TimingWith defaults shown.82-04-04default=20(100mS)82-04-07default=22(105mS)82-04-08default=200(1000mS)SettingEquivalentduration (mS)82-04-04Max.Break TM 1382-04-07Max.Break TM 1482-04-08Max.Break TM 25