NEC Xn120 Getting Started Manual

Also see for XN120 Vision: Advanced features guide User guide User guide User guide User manual

Contents

NEC Xn120 Getting Started Manual Manual pdf 9 page image

Wall Mount the Xn120 SystemXn120 Getting Started Guide 93- Wall Mount the Xn120 systemInstallation Considerations: To avoid electric shock or damage do not plug in or turn on the system power before completing theinstallation. Avoid working with the system during electrical storms. Use the power cord supplied with the product. Do not bundle power cords together, the cords may overheat. Ensure the system has a suitable Earth Ground connection.Environmental Considerations – Be sure the system is not: In direct sunlight or in hot, cold or humid places. In dusty areas or in areas where sulfuric gasses are produced. In places where shocks or vibrations are frequent or strong. In places where water or other fluids may come into contact with the equipment. In areas near electric welders or machines that emit high frequency radiation. Near computers, microwaves, air conditioners etc. Near radio antennas (including shortwave). If you are installing the optional expansion box or expansion cabinets ensure there is sufficient wallspace and ventilation. Refer to the wall mounting diagrams below.1 You will need a minimum of560mm x 680mm (W x H) wallspace for the Xn120 system.The system is 360mm x279mm (W x H)! You will need more space ifyou are installing the optionalunits: 20OPBox Expansion cabinetsRefer to the installationinstructions supplied withthese units.Use the wall mount template supplied to mark the four screw locations.Ensure that you use the correct wall plugs for the type of wall.Leave approximately 3~5mm of the screwprotruding from the wall.Have 200mm below the systemfor other cables connected to thesystem.Have 100mm onthe left side ofthe system forthe power cable.Have 200 mm abovethe system forventilation.Have 100mmon the rightside.! additional146mm if youhave a2OPBOX