439. Setting the PC Control SoftwareThis adjusts the projector using the PC Control Software.9-1. Starting/Exiting the Software9-1-1. Start the Software1. From the [Start] menu click [Program] [NEC Pro-jector User Supportware] [PC Control for iS/cS/MMS ].The Software will start.NOTE:• See "11. Using the PC Control Software (Menu Descriptions &Functions)" for information about the various functions. ( Page61).9-1-2. Exit the Software1. Click [File].The [File] menu will appear.2. Click [Exit].The Software will close.9-2. Setting connection of projector and PC9-2-1. Select Device CommunicationThis selects the method of connecting the projector and personal computer.This software permits the selection of 3 connection methods: LAN, USB, and serial.Preparation:• Please connect the projector and personal computer with the required cable. (See Section 5 called"Making Connections (Projector Model iS8-2K)" or Section 6 called "Making Connections (ProjectorModel iS10)".) When using wireless LAN, please insert a wireless LAN card into the projector.• Please start the PC Control Software.1. Click [Setup].The [Setup] menu will appear.2. Click [Communication Setting].The [Communication Setting] screen will appear.
