Chapter 2 - Blade Installation and StartupChapter 2 2 - 432.5.2.1 Connector Pin-Outs on the 8ESIDBTo install the 8ESIDB daughter board:1. Included with the ESIDB are two plastic spacers. Install the plastic spacers ontothe 8ESIU blade. Make sure to attach the spacers so that they extend out on theside of the daughter board which has the CN2 connector.2. Position the 8ESIDB’s CN1 connector over the CN2 connector on the ESIU blade.Press the boards together, ensuring the plastic spacers lock in place.3. Secure the boards together at the metal spacers by attaching the two metalscrews.4. Install the ESIU blade into the slot.Blade Maximum’s9.5” Chassis 19” Chassisw/CCPU19” Chassisw/o CCPU19” Chassisx4System Max.w/Networking8ESIDB 2 5 5 20 32RJ61 Cable Connector -CN301 (ports 1-4), CN401 (ports 5-8)Pin No. Connection1 Tip for port 42 Tip for port 33 Tip for port 24 Ring for port 15 Tip for port 16 Ring for port 27 Ring for port 38 Ring for port 4Any cabling to the ESIDB must be within the building - no outsidecabling is permitted.12345678
