Chapter 4 - Terminals and Optional EquipmentChapter 4 4 - 134.4.4 Programming the IP Terminal for the Dial Pad and Line Key Kit1. Enter the terminal’s program mode by pressing HOLD CONF * #.2. At the log-in screen, enter the user name (default: ADMIN) and password (default: 6633222) and pressthe OK Soft Key.3. Press Soft Key 3 for “Maintenance Setting”.4. Press Soft Key 4 for “Adjust”.5. Press Soft Key 2 for “Key Kit Type”.6. Select the type of dial button kit being used by pressing the Up/Down key.7. Press Soft Key 4 for “Next”.8. Select the type of line key kit being used by pressing the Up/Down key. By default, the correct line key kitfor the dial button kit selected above will be highlighted.9. Press Soft Key 4 for “OK” to complete.10. Continue pressing Soft Key 4 to exit (Exit-Exit-Save). The terminal will reset automatically.Line Key Entry DescriptionKit1 Type A - Japan with cursor keyKit2 Type A - US with cursor keyKit3 Type B - US with cursor keyKit4Kit8 32 Line Key without cursor keyKit 9 Type A - Japan without cursor keyKit10 Type A - US without cursor keyKit11 Type B - US without cursor keyKit12Line Key Entry DescriptionLine12 Enhanced 12-ButtonLine24 Enhanced 24-ButtonLine32 Enhanced 32-ButtonLine8 DESI-LessLine6 Value 6-ButtonLine2 Value 2-ButtonLine0 IP-CTS
