4 - 88 Chapter 4Chapter 4 - Terminals and Optional Equipment4.20.3 Removing/Attaching the LegsWhen necessary, you may need to remove the terminal legs. The process is the same whether it’s for a fullleg stand (as with the terminals) or a single leg (as with the 16-Button DLS).1. With the equipment face down and the LCD positioned away from you, press the locking tabs downwhile sliding the leg unit back.Figure 4-49: REMOVING THE TERMINAL LEG(S)4.20.4 Attaching the LegsWhen necessary, you may need to attach the terminal legs. The process is the same whether it’s for a fullleg stand (as with the terminals) or a single leg (as with the 16-Button DLS).1. With the equipment face down and the LCD positioned away from you, hold the legs verticallyingpositioning theleg connectors toward the terminal base.2. Place the leg attachment connectors on the equipment base and slide forward over the base receptorsuntil the leg(s) click into place.Figure 4-50: ATTACHING THE TERMINAL LEG(S)
