NTI Mini Server Environment Monitoring System3CONNECTORS AND LEDS# LABEL CONNECTOR/LED DESCRIPTIONPwr Green LED green — indicates device is powered1Fault Red LED red — illuminates if a sensor goes out of range of a configurablethreshold2 USB Console USB Type B female connector For connection of terminal for control through Text Menu3 Ethernet RJ45 female connector for connection to an Ethernet for remote multi-user control andmonitoring• Yellow LED- indicates 100Base-T activity when illuminated,10Base-T activity when dark• Green LED – illuminated when Ethernet link is present, strobingindicates activity on the Ethernet port4 9V 1.5A 2.1x5.5mm Power Jack for connection of power supply5 Temperature &HumiditySensorsRJ45 female connectors for connection of optional ENVIROMUX-T, ENVIROMUX-RH, orENVIROMUX-TRH sensors (The left port is "#1", the right port is"#2" as listed in the Summary Page on Page 19.)6 DIGITAL IN Wire terminal block For connecting dry-contact and liquid detection sensors7 OUTPUT RELAY Wire terminal block For control of external devices (contacts rated up to 1A, 30VDC or0.5A, 125VAC)8 Power Slide switch For powering the ENVIROMUX On (I) and Off (O)9 USB Devices USB Type A femaleconnectorsFor connecting USB Flashdrive and USB Modem10 System Reset Push button For manually rebooting the ENVIROMUX without power-cycling- amomentary press will activate11 Restore Defaults Push button For manually restoring the ENVIROMUX to factory default settings-press and hold for 5 seconds to activate
