NTI Mini Server Environment Monitoring System60Connect to ENVIROMUX from Command LineTo access the Text Menu from the command line, the ENVIROMUX must first be connected to the Ethernet (page 6).Connect Via TelnetNote: Telnet must be enabled for a connection via Telnet to be possible (page 37)To open a telnet session to the ENVIROMUX, Issue the following command from the command line:telnet <ENVIROMUX hostname or IP address><ENVIROMUX hostname> is the hostname configured in the workstation where the telnet client will run (through /etc/hosts orDNS table). It can also be just the IP address of the ENVIROMUX (default is 192.168.1.23).The user will be prompted for username and password to connect to the ENVIROMUX.Connect Via SSHTo open an SSH session to a serial port, issue the following command from the command line:ssh -l <Username> <ENVIROMUX hostname or IP address><Username> is any user configured to access the ENVIROMUX (as defined in the list of users (page 39).<ENVIROMUX hostname> is the hostname configured in the workstation where the SSH client will run (through /etc/hosts or DNStable). It can also be just the IP address of the ENVIROMUX (default is 192.168.1.23).The user will be prompted for a password to connect to the ENVIROMUX.The main menu of the Text Menu will be displayed whether you are connecting via USB Console,Telnet, or SSH.Figure 62- Text Menu- Administrator Main Menu
