NTI Mini Server Environment Monitoring System78Time Settings DescriptionTime Zone Enter the appropriate time zoneEnable Daylight Saving Change to “Yes” to have the time change in accordance Daylight Saving Time rulesSet Date Enter the system date in MM-DD-YYYY formatSet Time Enter the system time of day in hh:mm:ss formatEnable NTP Change to “Enabled” to allow the ENVIROMUX to automatically sync up with a time server viaNTPNTP server If the NTP is enabled, enter the Domain Name or IP address of the NTP serverNTP Frequency Enter the frequency (in minutes) for the ENVIROMUX to query the NTP server (minimum is 5minutes)E-mail Time Stamp Change to “Enabled” to allow the ENVIROMUX to automatically apply a time stamp to e-mailmessages sent to usersSMS Time Stamp Change to “Enabled” to allow the ENVIROMUX to automatically apply a time stamp to SMSmessages sent to usersPress <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.Restore Default SettingsSelect this option to restore the ENVIROMUX to the configuration settings it had upon receipt from the factory. Be careful!This will erase all user configuration settings. Upon restoration, the ENVIROMUX will reboot. Allow 1 minute before trying toreconnect and log in again.Figure 90- Text Menu-Restore Default SettingsNote: If “Restore Defaults” is used, the IP address will also be restored to its default address of 192.168.1.23 with a loginname “root” and password “nti”. To restore the root password to “nti” without having to restore all default settings,contact NTI for assistance.To identify the IP address of the ENVIROMUX without restoring defaults, use the Discovery Tool (page 17).Default settings can also be restored using the “Restore Defaults” button on the front of the ENVIROMUX (page 101) or throughthe web interface (page 34)
