NTI Mini Server Environment Monitoring System50Event Notification Settings (Continued)Auto Acknowledge Place a checkmark in this box to have alert notifications in the summary page return to normalstate automatically when an Event is no longer being triggered.Enable Syslog Alerts Place a checkmark in this box to have alert notifications sent via Syslog messagesEnable SNMP traps Place a checkmark in this box to have alert notifications sent via SNMP traps (v2c)Enable Email Alerts Place a checkmark in this box to have alert notifications sent via EmailEmail Subject Enter the subject to be viewed when an email alert message is receivedAttach IP Camera capture toemailAssociate an Event with an IP camera. Select an IP camera from the drop-down box. Animage will be captured and sent with the alert message when an alert is sent via e-mail. IPcameras that are monitored by the ENVIROMUX (page 31) will be available for this purpose.Note: To be able to send IP camera captures as e-mail attachments, viewer security (inyour camera’s configuration) needs to be disabled. Consult your IP camera manual tosee if this feature is present and for instructions on how to do this.Enable SMS Alerts Place a checkmark in this box to have alert notifications sent via SMS messages (requires amodem)After all options are selected, click the “Save” button. This Event will now be added to the Events page (Figure 49). Up to 50events can be defined. Events can be configured to trigger alerts by themselves, and/or be used in combination with otherevents to trigger Smart Alerts.With Events defined, Smart Alerts (up to 20) can be configured to use Event combinations to send alert messages.Figure 52- Smart Alert summary pageFrom the side menu, select “Smart Alerts”, and “Smart Alerts” again. On the Smart Alerts page, click on “Add New Smart Alert”.A new numbered Smart Alert will be added to the summary page (above). To configure the Smart Alert, click on it.
