NTI ENVIROMUX Series Manual

Also see for ENVIROMUX Series: Installation manual Installation manual Quick installation guide Installation manual Wiring instruction

Contents

NTI ENVIROMUX Series Manual Manual pdf 45 page image

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM44Account Settings DescriptionEnabled Change to “Yes” to enable this user to access the ENVIROMUXAdmin Change to “Yes” if this user should have administrative privilegesTitle Enter information as applicable (optional)Company Enter information as applicable (optional)Department Enter information as applicable (optional)LDAP CN “Common Name” assigned in the LDAP server account in an Active Directory. Often a name assignedthat is different than the Username. If this is the same as the Username (above), this can be left blank.LDAP OU Enter the Organizational Unit the user belongs to in an Active DirectoryFormat is More about User PrivilegesThe root user (or any user with administrator rights) can change the root password and configure how the root user will receivealert messages. Users with administrative rights can change all configuration settings except for the root user name.User Contact SettingsSelect “Contact Settings” from the list and press <Enter>. A menu with the contact settings for that specific user will open.Figure 52- Text Menu-User Contact SettingsContact SettingsGroup 1-8 Change to “Yes” if the user should receive messages from sensors, IP devices and accessoriesin Groups 1-8Email Alerts Change to “Yes” if the user should receive messages via emailBrief Email Change to “Yes” if the user should receive messages with limited content via emailEmail address Enter a valid email address if the user should receive email alert messagesSyslog alerts Change to “Yes” if the user should receive alerts via syslog messagesSyslog Facility Select a Syslog Facility for the messages to be sent to- Local0 thru Local7 (default is Local0).SNMP traps Change to “Yes” if the user should receive alerts via SNMP trapsSyslog/SNMP IP address Enter a valid syslog/SNMP IP address for the user to receive syslog/SNMP messagesSMS Alerts Change to “Yes” if the user should receive alerts via SMS messagesSMS Number Enter a valid phone number for the user to receive SMS messagesPress <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.