User Manual of Digital Video Recorder1279.2 Configuring Advanced Settings9.2.1 Configuring PPPoE SettingsPurpose:The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).Steps:1. Enter the Network Settings interface.Menu > Configuration > Network2. Select the PPPoE tab to enter the PPPoE Settings interface.Figure 9. 2 PPPoE Settings Interface3. Check the PPPoE checkbox to enable this feature.4. Enter User Name and Password for PPPoE access.The User Name and Password should be assigned by your ISP.5. Click the Apply button to save the settings.6. After successful settings, the system asks you to reboot the device to enable the new settings, and thePPPoE dial-up is automatically connected after reboot.You can go to Menu > Maintenance > System Info > Network interface to view the status of PPPoEconnection.9.2.2 Configuring DDNSPurpose:If your DVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to beused for network access.Prior registration with your ISP is required before configuring the system to use DDNS.Steps:1. Enter the Network Settings interface.Menu > Configuration > Network2. Select the DDNS tab to enter the DDNS Settings interface.
