User Manual of Digital Video Recorder615.1 Configuring Encoding ParametersBefore you start:1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.(Menu>HDD>General)Figure 5. 1 HDD- General2. Click Advance to check the storage mode of the HDD.1) Whether the HDD mode is Quota, please set the maximum record capacity. For detailed information,see Chapter 10.5 Configuring Quota Mode.2) If the HDD mode is Group, you should set the HDD group. For detailed information, see Chapter 5.8Configuring HDD Group for Recording.Figure 5. 2 HDD- AdvancedSteps:1. Enter the Record settings interface to configure the encoding parameters:Menu>Record>EncodingFigure 5. 3 Record Encoding2. Set the encoding parameters for recording.
