User Manual of Digital Video Recorder135Steps:1. Enter the Network Settings interface.Menu > Configuration > Network2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 9. 22.3. Enter new Server Port and HTTP Port.Figure 9. 22 Host/Others Settings Menu4. Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP Portis 80, and you can change them according to different requirements.5. Click the Apply button to save and exit the interface.The Server Port should be set to the range of 2000-65535 and it is used for remote client software access. TheHTTP port is used for remote web browser access.9.2.10 Configuring HTTPS PortPurpose:HTTPS provides authentication of the web site and associated web server that one is communicating with,which protects against Man-in-the-middle attacks. Perform the following steps to set the port number of https.Example:If you set the port number as 443 and the IP address is 192.0.0.64, you may access the device by inputtinghttps://192.0.0.64:443 via the web browser.The HTTPS port can be only configured through the web browser.Steps:1. Open web browser, input the IP address of device, and the web server will select the languageautomatically according to the system language and maximize the web browser.2. Input the correct user name and password, and click Login button to log in the device.3. Enter the HTTPS settings interface.Configuration > Remote Configuration > Network Settings > HTTPS4. Create the self-signed certificate or authorized certificate.
