User Manual of Digital Video Recorder393.2 Operations in Live View ModeIn live view mode, there are many functions provided. The functions are listed below.• Single Screen: show only one screen on the monitor.• Multi-screen: show multiple screens on the monitor simultaneously.• Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screenon the configuration menu before enabling the auto-switch. Menu>Configuration>Live View>DwellTime.• Start Recording: normal record and motion detection record are supported.• Quick Set: select the output mode to Standard, Bright, Gentle or Vivid.• Playback: play back the recorded videos for current day.• Aux/Main output switch: the DVR checks the connection of the output interfaces to define the main andauxiliary output interfaces. The priority level for the main and aux output is HDMI>VGA>CVBS. Thismeans if the HDMI is used, it will be the main output. If the HDMI is not used, the VGA output will bethe main output. See the table below.Table 3. 2 Priorities of InterfacesHDMI VGA CVBS Main output Auxiliaryoutput1 √ √ √ HDMI VGA2 √ × √ HDMI CVBS3 × √ √ VGA CVBS4 × × √ CVBS √ means the interface is in use, × means the interface is out of use or the connection is invalid. And theHDMI, VGA and CVBScan be used at the same time.When the aux output is enabled, the main output cannot do any operation, and you can do some basic operationon the live view mode for the Aux output.3.2.1 Front Panel OperationThis function is not supported by TVI-D1xxx series.Table 3. 3 Front Panel Operation in Live ViewFunctions Front Panel OperationShow single screen Press the corresponding Alphanumeric button. E.g. Press 2 to display only thescreen for channel 2.Show multi-screen Press the PREV button.Manually switchscreensNext screen: right direction button.Previous screen: left direction button.Auto-switch Press Enter button.Playback Press Play button.
