MCIMX6Q-SL: Development platform for i.MX 6QuadBuilt to Freescale® SABRE Lite designDoc ID: MCIMX6QSLUMRev. 0.9, 11/12/2012Embest and element14 are trademarks of Premier Farnell plc 11© 2012 Premier Farnell plc. All Rights ReservedFreescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.Figure 3-1 Block Diagram of i.MX 6Dual/6Quad3.1.2 External memory interfaces:o 16-bit, 32-bit, and 64-bit DDR3-1066,LV-DDR3-1066, and 1/2 LPDDR2-1066 channels, supportingDDR interleaving mode, for 2x32 LPDDR2-1066o 8-bit NAND-Flash, including support for Raw MLC/SLC, 2 KB, 4 KB, and 8 KB page size, BA-NAND,PBA-NAND, LBA-NAND, OneNAND™ and others. BCH ECC up to 32 bit.o 16-bit NOR Flash. All WEIMv2 pin are muxed on other interfaces.o 16-bit PSRAM, Cellular RAM3.1.3 Interface to external devicesEach i.MX 6Dual/6Quad processor enables the following interfaces to external devices (some of them aremuxed and not available simultaneously):o Hard Disk Drives--SATA II, 3.0 Gbpso Displays--Total five interfaces available. Total raw pixel rate of all interfaces is up to 450Mpixels/sec, 24 bpp. Up to four interfaces may be active in parallel.o One Parallel 24-bit display port, up to 225 Mpixes/sec (for example, WUXGA at 60 Hz ordual HD1080 and WXGA at 60 Hz)o LVDS serial ports!aOne port up to 165 Mpixels/seor two ports up to 85 MP/sec (forexample, WUXGA at 60 Hz) eacho HDMI 1.4 porto MIPI/DSI, two lanes at 1 Gbpso• Camera sensors:o Parallel Camera port (up to 20 bit and up to 240 MHz peak)o MIPI CSI-2 serial camera port, supporting up to 1000 Mbps/lane in 1/2/3-lane mode and up to