MCIMX6Q-SL: Development platform for i.MX 6QuadBuilt to Freescale® SABRE Lite designDoc ID: MCIMX6QSLUMRev. 0.9, 11/12/2012Embest and element14 are trademarks of Premier Farnell plc 37© 2012 Premier Farnell plc. All Rights ReservedFreescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.5 ESD PRECAUTIONS AND PROPER HANDLING PROCEDURESThis section includes the precautions for mechanical handling and static precautions to be taken to avoid ESDdamage: Avoid carpets in cool, dry areas. Leave development kits in their anti-static packaging until ready to beinstalled. Dissipate static electricity before handling any system components (development kits) by touching agrounded metal object, such as the system unit unpainted metal chassis. If possible, use antistatic devices, such as wrist straps and floor mats. Always hold a evaluation board by its edges. Avoid touching the contacts and components on the board. Take care when connecting or disconnecting cables. A damaged cable can cause a short in the electricalcircuit. Prevent damage to the connectors by aligning connector pins before you connect the cable. Misalignedconnector pins can cause damage to system components at power-on. When disconnecting a cable, always pull on the cable connector or strain-relief loop, not on the cableitself.6 APPENDIX A: SCHEMATICSThe schematics for the development platform for i.MX 6Q can be found athttp://www.element14.com/community/docs/DOC-51148