NXP Semiconductors MCF5253 Quick Start Manual

Also see for MCF5253: Reference manual

Contents

MCF5253 Evaluation Board Quick Start Guide, Rev. 0OverviewFreescale Semiconductor21.3 Components of the EVB1.3.1 EVB Kit ContentsFigure 1 shows the components included in the MCF5253 EVB kit. Please inspect your kit to ensure allcomponents are present and undamaged. If any of these components are missing or damaged, pleasecontact Freescale Semiconductor using resources available at http://www.freescale.com/support.Figure 1. Components in the MCF5253 EVB Kit1.3.2 What You Need to ProvideIn addition to the components listed in Section 1.3.1, “EVB Kit Contents”, you may also require thefollowing components not included in the EVB kit:• Two standard circuit board jumpers• A DB-9 serial cable (male to female)• A USB-to-serial adapter (if your computer is not equipped with a serial port)• A USB flash drive (also known as a jump drive or a thumb drive)• A computer meeting the following requirements:— Windows 98SE or later— An available DB-9 serial port (or an extra USB port for a USB-to-serial adapter)— An available USB portEVB circuit board Power adapter with plugsUSB A-B cable (6’) P&E USB BDM interface• MCF5253 Evaluation Board QuickStart Guide (this document)• Warranty Registration Card(920-75133)• Technical Information CenterWorldwide Contact List• MCF5253 ColdFire® ReferenceManual• M5253EVB User’s Manual• ColdFire Programmer’s ReferenceManualAdditional componentsGE 6-in-1 Cable