NXP Semiconductors MCF5253 Quick Start Manual

Also see for MCF5253: Reference manual

Contents

The CF Flasher ToolMCF5253 Evaluation Board Quick Start Guide, Rev. 0Freescale Semiconductor 7NOTEIf your flash drive is formatted using a Windows-based file system (FAT orNTFS), you may receive the message shown in Figure 6. This message doesnot affect the functionality of this demo.Figure 6. Warning Message During the Mount Process5. Type the following commands, pressing Enter after each command, to view the contents of theflash drive:cd /tmp/mydisk/ls6. Type the following command to create a new, empty file called newfile.txt on your flash drive:touch newfile.txtCongratulations. You have successfully used the high speed USB OTG module of the MCF5253 in hostmode to communicate with a USB device.4 The CF Flasher ToolCF Flasher is a Windows-based software tool that is used to program and erase the flash memory on theEVB. The tool can be downloaded from the MCF5253 Product Summary Page on the Freescale ColdFireWeb site, http://www.freescale.com/coldfire. If you have trouble running the USB demonstrationapplication discussed in Section 3, “Running the USB Demonstration”, use CF Flasher to clear the EVB’sflash memory and transfer the demonstration to it.This section guides you through installing CF Flasher, connecting the required hardware to use it, andusing it to transfer the USB demonstration application to the EVB flash memory.4.1 Installing CF FlasherTo install CF Flasher on your computer.1. Start your computer and ensure that you are logged in with administrative privileges.2. Create a folder called CFFLASHER on your desktop.3. Download CF Flasher from the MCF5253 Product Summary Page on the Freescale ColdFire Website, http://www.freescale.com/coldfire, and save the files to the CFFLASHER folder on your desktop.4. Open the CFFLASHER folder on your desktop, and extract the contents of the CFFLASHER.zip archive(two applications, CFFlasher 3.1 setup.exe and CF Flasher 3.1 M5208EVB patch.exe) to thesame folder.5. Run the application CFFlasher 3.1 setup.exe to begin installing CF Flasher and required driversfor the P&E USB BDM interface.6. Accept all default options during the installation.7. When prompted, restart your computer.8. Run the application CF Flasher 3.1 M5208EVB patch.exe to apply a necessary patch to CF Flasher.VFS: Can't find an ext2 filesystem on dev sda1.

/ 10

Related manuals for NXP Semiconductors MCF5253