Napoleon Acies Series Owner's Manual
Also see for Acies Series: Owner's manual
                                                                    | |
Contents
| 
ENW415-1713 / 06.30.1711operating your appliance2.3.3 changing the batteries in the remote / battery holder (including switch)• Ensure the gas and electrical power to the appliance is turned off.• Appliance may be hot, do not service until the appliance has cooled.! WARNING(4) AA BatteriesON REMOTE OFFSAFETY BARRIER(4) AA BatteriesON REMOTE OFFFor battery holder (including switch):A. Remove the two screws securing cover plate to battery holder (including switch). Do not discard.B. Remove the 4 “AA” alkaline batteries in the battery holder (including switch) and replace with new ones.Note the polarity of the batteries and insert as indicated on the cover (+/-).C. Secure the cover plate to the battery holder (including switch) using the screws removed in step A.For remote control:A. Press the securing clip on the back of the remote control to release the back cover. Remove the 3 “AAA”alkaline batteries in the remote and replace with new batteries then press the ON button. The batteryholder will beep 4 times to indicate that the remote’s command is accepted.(4) AA BatteriesRemote controlReset / ProgramButton (PRG)Battery Holder(including switch)Slider Switch(Illustrated with coverplate removed)Battery holder (includingswitch) would have beenlocated close to theappliance during installation |
Related manuals for Napoleon Acies Series
Napoleon Acies Series Owner's Manual
Napoleon Ascent X Series Owner's Manual
Napoleon Vector Series Owner's Manual
Napoleon Oakville Series Owner's Manual
Napoleon Altitude X Series Owner's Manual
Napoleon Ascent Deep Series Owner's Manual
Napoleon Ascent Linear Series Owner's Manual
Napoleon Ascent Linear Series Owner's Manual
Napoleon Ascent Linear Series Owner's Manual
Napoleon Oakville GDIG3 Series Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine