Napoleon Acies Series Owner's Manual

Also see for Acies Series: Owner's manual

Contents

Napoleon Acies Series Owner's Manual Manual pdf 14 page image

W415-1713 / 06.30.17EN14remote control operation23.376°F68Room TemperatureSet Temperature76°FMAX76°FOFF 76°F76°F76°FHiFlame Off Flame at level 1 Flame at level 5 Flame at “Hi” level 676°Fchild lock68 Hi76°FOFF 76°F76°FIPI 76°FCPIONSMARTThe life span of the remote batteries depends on various factors: quality of the batteries,the number of ignitions, etc.When the transmitter batteries are low, a battery icon will appear on the LCD displaybefore all battery power is lost. When the batteries are replaced, this icon will disappear.When the receiver batteries are low, no “beep” will be emitted from the receiver whenit receives an on/off command. This in an alert for the receiver that there’s low battery.When the batteries are replaced the “beep” will be emitted from the receiver when the on/off key is pressed.If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding thethree position slider switch on the receiver to the on position. This will bypass the remote control feature and theappliance main burner will come on if the gas valve is in the on position.ADD TITLE: IN THE EVENT OF A POWER FAILUREIf the receiver is equipped with batteries they will enable flame height control or on/off function to control theappliance during a power failure. Blower and Night Light™ operation is not possible. Refer to “applianceoperation” section when communications between receiver and transmitter have been lost. The receiver willemit a “beep” sound to confirm programming has been successful once power is restored. During a powerfailure, if the appliance was on, the flame height will stay at the setting prior to the failure. If off when the failureoccurs and then turned on, the fl ame height will come on at “Hi”. The fl ame height can then be controlled by theremote.ADD TITLE: LOW BATTERY / MANUAL BYPASS76°FMAX76°FOFF 76°F76°F76°FHiFlame Off Flame at level 1 Flame at level 5 Flame at “Hi” level 676°Fchild lockOFF76°FIPI 76°FCPISMARTA. Use the mode key to guide you to the Night Light™ icon.B. The intensity of the output can be adjusted through 6 levels.Use the up/down arrow keys to adjust the output level. A single beepwill confi rm reception of the command.ADD TITLE: CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTIONA. When the transmitter is in the off position, use the mode key to guideyou to the CPI mode icon.B. Press the up/down to switch between IPI and CPI modes. A singlebeep will confirm reception of the command.Blue LCD DisplayOn / Off KeyUp / Down Arrow KeyMode KeyTemperature Key73 2376°F68Room TemperatureSet Temperature76°FMAX76°FOFF 76°F76°F76°FHiFlame Off Flame at level 1 Flame at level 5 Flame at “Hi” level 676°Fchild lock76°FOFF 76°FON76°F76°F68 76°FHi76°FOFF 76°F76°FIPI 76°FCPIONSMART°F °CBlue LCD DisplayOn / Off KeyUp / Down Arrow KeyMode KeyTemperature Key73 2376°F68Room TemperatureSet Temperature76°FMAX76°FOFF 76°F76°F76°FHiFlame Off Flame at level 1 Flame at level 5 Flame at “Hi” level 676°Fchild lock76°FOFF 76°FON76°F76°F68 76°FHi76°FOFF 76°F76°FIPI 76°FCPIONSMART°F °C76OFF 76 7676HiFlame Off Flame at level 1 Flame at level 5 Flame at “Hi” level 676°Fchild lock76°FIPI 76°FCPIIf the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPIto CPI position to enable remote CPI operation. If the switch is set to IPIthen it will only work in IPI regardless of what is set on the remote controlhandset.note:4.7 continuous pilot / intermittent pilot (CPI / IPI) selection4.8 low battery / manual bypass4.9 in the event of a power failureNapoleon’s eFIRE app will revolutionize the way you use your fireplace. We have cracked the code and present toyou the first fireplaces to be controlled by Bluetooth technology, using an intuitive app on your mobile device.When fully equipped (if applicable), the eFIRE application allows you to create every imaginable color, selecting theone that fits your current mood, or your décor with ease, the simple colour wheel tool swiftly scrolls through the fullcolor spectrum. Napoleon’s eFIRE app controls every function of your fireplace including; on/off, flame height and atimer to create a schedule for your fireplace that works for you.Using the instructions on the eFIRE controller application website http://napoleonfireplaces.com/efire, install theapp and enjoy the features the eFIRE Controller app offers.*4.10 eFIRE Controller application (optional for L models)*Visit the website or contact your authorized dealer for appliance specific information and/or frequently askedquestions regarding features and products available with the eFIRE Controller app.The remote control is considered the master control for the appliance and can always be used to turn theappliance off (for example, in the event the user who’s eFIRE controller app was controlling the applianceleaves the home).note: