Napoleon Acies Series Owner's Manual

Also see for Acies Series: Owner's manual

Contents

Napoleon Acies Series Owner's Manual Manual pdf 23 page image

ENW415-1713 / 06.30.1723maintenanceHeat Rail(with Gasket)1. Fully extend door mounting brackets of appliance. Carefully place GGA onto supports.2. Keep brackets tight against GGA and install using 4 screws and washers (provided).6.3.2 installing your GGA (LVX models only)• Allow appliance to cool completely before proceeding.! WARNINGIf necessary, removing the door trim can make it easier to adjust GGA. Reinstall door trim when finished.note:The GGA is supplied with 6 screws that provide slight up/down and tilt adjustment to align glass to finishingmaterial. If the top of your GGA is not flush to the heat rail (with gasket) on both ends and/or requires anadjustment, please contact your authorized dealer.important: