Napoleon Ascent BHD4PN Installation And Operation Manual

Also see for Ascent BHD4PFCN: Installation and operation manual

Contents

Napoleon Ascent BHD4PN Installation And Operation Manual Manual pdf 45 page image

ENW415-1285 / G / 04.27.1845finishing10.12.1 glowing embers10.12.2 charcoal embers10.12.3 charcoal lumps22.1Tear the embers into pieces and loosely layer above the burner ports covering the burner area. Care should betaken to shred the embers into thin, small irregular pieces as only the exposed edges of the fibre hairs will glow.The ember material will only glow when exposed to direct fl ame; however, care should be taken to notblock off the burner ports.Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. PHAZER™logs glow when exposed to direct flame. Use only certified “glowing embers” and PHAZER™ logs available fromyour local authorized dealer / distributor.! WARNING• Do not block or close off the burner ports. Blocked ports can cause an incorrect fl ame pattern, carbondeposits and delayed ignition.22.2Randomly place the charcoal embers along the front and sides of the log support in a realistic manner.Fine dust found in the bottom of the bag should not be used.! WARNING• Do not block or close off the burner ports. Blocked ports can cause an incorrect fl ame pattern, carbondeposits and delayed ignition.• When supplied, charcoal embers, charcoal lumps and vermiculite are not to be placed on the burner.note:Charcoal embers are not to be placed on the burner.22.4Place the lumps in front of the logs in a realistic manner taking care not to block or close off any of the burner ports.! WARNING• Do not block or close off the burner ports. Blocked ports can cause an incorrect fl ame pattern, carbondeposits and delayed ignition.• When supplied, charcoal embers, charcoal lumps and vermiculite are not to be placed on the burner.