ENW415-1468 / A / 09.30.1693.0 PRE-INSTALLATION PREPARATIONHave an authorized dealer install the appliance. If you install the appliance yourself, have your dealer reviewyour installation plans and/or installation.Draw out a detailed plan of the installation including dimensions and verify the dimensions with therequirements listed in this manual.You may wish to adjust the appliance position slightly to ensure the vent does not intersect with a framingmember. Appliance must be positioned so that no combustibles are within, or can swing within (e.g. drapes,doors), 4 feet (1.2m) of the front of the appliance. 67.1B3.1 APPLIANCE PLACEMENT3.2 CLEARANCE TO COMBUSTIBLESPARALLEL & CORNER SINGLE WALL CONNECTOR DOUBLE WALL CONNECTOR1100 / 1150 1400 / 1450 1900 1100 1400 / 1450 1900SIDEWALL (A) 12"(30.5cm)12"(30.5cm)22"(55.9cm)10"(254mm)10"(254mm)22"(59.9cm)SIDEWALL TO FLUE (B) 21"(53.3cm)21"(53.3cm)21"(53.3cm)19"(48.3cm)19"(48.3cm)19"(48.3cm)BACKWALL (C) 10"(254mm)12"(305mm)12"(305mm)6"(152mm)6"(152mm)12"(305mm)BACKWALL TO FLUE (D) 13"(33cm)16.5"(41.9cm)16.5"(41.9cm)9"(229mm)9"(229mm)16.5"(41.9cm)CORNER (E) 6"(152mm)6"(152mm)8"(203mm)2"(51mm)4"(102mm)8"(203mm)CEILING (F) 7 feet(2.1m)7 feet(2.1m)7 feet(2.1m)7 feet(2.1m)7 feet(2.1m)7 feet(2.1m)Clearances can be reduced with shielding acceptable to local authorities. Reduced installation must complywith NFPA 211 or CAN/CSA-B365.Clearances are unable to be reduced for the 1150 by using double wall pipe.14"23"ALCOVE4 FOOTMAX9” 6”1100 series only may be installed, using a listed double wall connector,such as Security DL6 in Canada, the Simpson Duravent Plus DVL inthe USA or an equivalent double wall connector, into an alcove havinga depth of no more than 4 feet and a height of at least 7 feet (2.1m).The minimum clearances are as shown.3.3 ALCOVE INSTALLATIONBACK WALLBSIDE WALLABACK WALLCSIDE WALLFDEEDO NOT INSTALL INTO ANY AREA HAVING A HEIGHT LESS THAN 7 FEET (2.1m)(CEILING OF ENCLOSURE TO APPLIANCE BOTTOM, EXCLUDING HEARTH HEIGHT)! WARNING