15W415-0379 / C / 03.12.105.0 FINISHING! WARNINGRISK OF FIRE!NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALSSUCH AS BRICK, MARBLE, GRANITE, ETC., PROVIDED THAT THESE MATERIALS DO NOT GOBELOW THE SPECIFIED DIMENSION AS ILLUSTRATED. AS AN ALTERNATIVE, YOU CAN FINISH THEAPPLIANCE WITH DRYWALL, SEE ILLUSTRATIONS TO FOLLOW.FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.72.25.1 LOG PLACEMENT! WARNINGFAILURE TO POSITION THESE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TOUSE PARTS SPECIFICALLY APPROVED WITH THIS HEATER MAY RESULT IN PROPERTY DAMAGEOR PERSONAL INJURY.DO NOT PLACE CHARCOAL EMBERS, VERMICULITE OR CHARCOAL LUMPS ON THIS BURNER.ALL PREVIOUSLY APPLIED LOOSE MATERIAL (GLOWING EMBERS) MUST BE REMOVED PRIOR TOREAPPLICATION.DO NOT CHANGE OR SUBSTITUTE THE GLOWING EMBER MATERIAL PROVIDED WITH THE FIRE-PLACE. IF REPLACING, USE ONLY THE NAPOLEON FIREPLACE REPLACEMENT GLOWING EMBERSAVAILABLE FROM YOUR AUTHORIZED DEALER.PHAZERTM logs and glowing embers, exclusive to Napoleon Fireplaces, provide a unique and realistic glowingeffect that is different in every installation. Take the time to carefully position the glowing embers for a maxi-mum glowing effect. Log colours may vary. During the initial use of the fireplace, the colours will become moreuniform as colour pigments burn in during the heat activated curing process.REAR LOG SUPPORTLEFT TAB REAR TABS RIGHT TAB REAR TABS15.1.1 Prepare for log placement by ensuring the left,rear, and right tabs of the log support andfirebox bottom are bent up to 90º, to aid inlocating the logs.5.1.2 Place the back log 1 onto the base of the firebox.Ensure that the back of the log rests against therear log support on the back wall of the firebox, andbehind the two rear tabs on the firebox bottom.