Napoleon HDX40NT Installation And Operating Instructions Manual

Contents

Napoleon HDX40NT Installation And Operating Instructions Manual Manual pdf 30 page image

30W415-0869 / A / 06.10.106.0 FINISHING6.1 DOOR REMOVAL / INSTALLATIONBefore the glass door can be removed, the optional face-plate must be removed, see optional faceplate instructionsfor more information.The glass door is secured to the top front edge of the fireboxwith two latches. Pull the handles of the latches forward,then lift the latches out from the door frame to release thetop of the door. Next, pivot the door forward until the topedge clears the front of the appliance. Carefully grip thesides of the door lifting it out from the retaineralong the bottom of the door.! WARNINGRISK OF FIRE!NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALSSUCH AS BRICK, MARBLE, GRANITE, ETC., PROVIDED THAT THESE MATERIALS DO NOT GOBELOW THE SPECIFIED DIMENSION AS ILLUSTRATED.DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASSREMOVED, CRACKED, BROKEN OR SCRATCHED.FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.THE GLASS DOOR ASSEMBLY IS DESIGNED TO PIVOT FORWARD WHEN RELIEVING EXCESSPRESSURE THAT MIGHT OCCUR. FINISHING OR OTHER MATERIALS MUST NOT BE LOCATED INTHE OPENING SURROUNDING THE DOOR AS THIS WILL INTERFERE WITH THE DOORS ABILITY TORELIEVE THE PRESSURE.72.6! WARNINGGLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DONOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIROPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FORSERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TOTHE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.75.1HANDLESRETAINERS