Napoleon Inspiration ZC Series Installation And Operation Manual

Also see for GDIZCN-SB: Installation and operation manual

Napoleon Inspiration ZC Series Installation And Operation Manual Manual pdf 13 page image

ENW415-1366 / D / 12.07.18 13finishing3.3 log placementPHAZERTM logs and glowing embers exclusive to Napoleon Fireplaces, provide a unique and realistic glowing effect that isdifferent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect.Log colours may vary. During the initial use of the fireplace, the colours will become more uniform as colourpigments burn in during the heat activated curing process.A. Place the rear log (W135-0136) onto the two logsupports and against the air intake pipe.B. Position the left log (W135-0137) and the right log(W135-0138) against the grate posts and line up thestuds located on the burner with the holes on thebottom of the logs. Keep slightly back of the frontrow of ports.C. Fit the centre log (W135-0139) into place behind theleft log and into the pocket provided on the rear log.Tear the embers into pieces and place along the front rowof ports covering all of the burner area in front of the logs.Care should be taken to shred the embers into thin, smallirregular pieces as only the exposed edges of the fibrehairs will glow. The ember material will only glow whenexposed to direct flame; however, care should betaken to not block the burner ports.Blocked burner ports can cause an incorrect flamepattern, carbon deposits and delayed ignition. PHAZERTMlogs glow when exposed to direct fl ame. Use only certifi ed "glowing embers" and PHAZERTM logs available fromyour authorized dealer / distributor.3.4 glowing embersGLOWING EMBERSBBAC! WARNING• Failure to position the logs in accordance with these diagrams or failure to use only logs specifically approvedwith this appliance may result in property damage or personal injury.• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, sinceappliance may not function properly and delayed ignition may occur.• The logs are fragile and should be handled with care.