Napoleon Oakville GDIG3 Series Owner's Manual

Also see for Oakville Series: Installation manual Owner's manual Owner's manual Installation manual Installation manual

Napoleon Oakville GDIG3 Series Owner's Manual Manual pdf 18 page image

W415-1867 / B / 02.07.19EN18maintenance! WARNING• Glass may be hot. Do not touch glass until cooled.• If equipped with door latches that are part of a safety system, they must be properly engaged. Do notoperate the appliance with latches disengaged.• Facing and/or finishing materials must not interfere with air fl ow through air openings, louvre openings,operation of louvres, or doors/access for service. Observe all clearances when applying combustiblematerials.• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavyand fragile so handle with care.7.3 safety barrier and glass door removal / installationA barrier designed to reduce the risk of burns from the hot viewing glass is provided with theappliance and must be installed.1. Before the glass door can be removed, the safety barrier must be removed. Lift the safety barrier fromthe 4 tabs, tilt the top forward, and remove from the appliance (Fig. 1 and 2).2. Release the top left and right door latches, located at the top of the door (Fig. 3). Tilt forward and liftfrom slots.3. Reverse these steps to re-install the safety barrier and glass door. Ensure safety barrier is installedcorrectly.SAFETY BARRIERFig. 1 Fig. 2note:If applicable, the optional front must be removed to allow the door to be opened or closed.Fig. 3GDIG3 IllustratedGDIG3 Illustrated