National Instruments NI Vision CVS-1450 Series User Manual

Also see for NI Vision CVS-1450 Series: Quick start guide Getting started Quick start guide User manual User manual

Contents

National Instruments NI Vision CVS-1450 Series User Manual Manual pdf 30 page image

Chapter 2 Setup and ConfigurationNI CVS-1450 Series User Manual 2-16 ni.comInstalling the LabVIEW Real-Time Module, Vision DevelopmentModule, and NI-IMAQ for IEEE 1394 CamerasNote You must install LabVIEW, the LabVIEW Real-Time Module, and the VisionDevelopment Module software before installing the NI-IMAQ for IEEE 1394 Camerasdriver software.Complete the following steps to install LabVIEW, the LabVIEWReal-Time Module, the Vision Development Module, and NI-IMAQ forIEEE 1394 Cameras onto the development computer.1. Insert the LabVIEW CD into the CD-ROM drive.2. When the installation splash screen appears, click Install LabVIEW,and follow the setup instructions.3. Insert the LabVIEW Real-Time Module CD into the CD-ROM drive.4. When the installation splash screen appears, click Install LabVIEWReal-Time Module, and follow the setup instructions.5. Insert the Vision Development Module CD into the CD-ROM drive.6. When the splash screen appears, click Install Vision DevelopmentModule, and follow the setup instructions.7. Insert the NI-IMAQ for IEEE 1394 Cameras CD into the CD-ROMdrive.Note If you select the custom software installation, make sure to install the support for theCVS-1450 Series.8. When the splash screen appears, click Install NI-IMAQ forIEEE 1394 Cameras, and follow the setup instructions.9. When prompted, click Yes to restart the development computer.Configuring the IP Address using the LabVIEW Real-Time ModuleTo set up an IP address for the CVS-1450 device, complete the followingsteps:1. Open the Measurement & Automation Explorer (MAX) configurationsoftware by double-clicking the MAX icon on the desktop, or navigateto MAX by selecting Start»Programs»National Instruments»Measurement & Automation.2. Expand the Remote Systems branch of the configuration tree, andclick 192.168.10.12 to display the Network Settings window.This IP address is assigned to all unconfigured CVS-1450 devices.