Adjusting the base key only affects the notes played by the pads of your controller. Itdoes not affect the notes recorded in your Patterns! To adjust the key of notes in Pat-terns, please refer to section ↑4.1.3, Selecting Multiple Sounds or Groups.You can select multiple pads and quickly change the base key for all of them at once!See section ↑7.4, Editing Events to know how to do this.Adjusting the Base Key in the SoftwareBy default the base key of every Sound slot is C3 (i.e. middle C in the MASCHINE convention).To change the base key of the selected pad(s) / Sound slot(s) in the software:1. Click the Pad View button above the Sound List in the Pattern Editor to show the Padview for the focused Group.2. Click the Key value and drag your mouse vertically, or double-click it, enter a new valueon your computer keyboard, and press [Enter] to confirm.Adjusting the Base Key on Your ControllerTo change the base key of the selected pad(s) / Sound slot(s) on your controller:1. Hold the PAD MODE button to enter Pad Mode (or press PAD MODE + Button 1 to pin it).On the right display, the key indicated for pad 1 (in the bottom left corner) is the currentbase key.2. Press Button 5 (OCT-) / 6 (OCT+) to adjust the base key by octaves, or Button 7 (SEMI-) /8 (SEMI+) to adjust the base key by semitones.The new values are indicated for all pads on the right display.3. Release PAD MODE (or press it again if you pinned the mode).5.4 Playing ToolsOn top of the various pad settings described in the previous section (see ↑5.1, Adjusting thePads), MASCHINE also offers you a series of intuitive playing tools particularly useful whenplaying live:Playing on the ControllerPlaying ToolsMASCHINE - Manual - 235
