→ The selected value is highlighted on the right display and the corresponding pad turnsfully lit.To disable the Arrange Grid, simply select the OFF value in the top right corner:► To disable the Pattern Grid, hold SHIFT + GRID, press Button 3 (ARRANGE), then presspad 16 (OFF).You don’t need to explicitly enable the Pattern Grid on your controller: It is enabled assoon as you select a resolution other than OFF (pad 16).Adjusting the Grid Using Record Prepare ModeThis extra method is very useful if you are about to start a new recording. Indeed, the RecordPrepare mode (accessed by pressing the unlit REC button and holding it) is tightly integratedinto the recording workflow of Control mode. For all details please refer to section ↑7.2.2, TheRecord Prepare Mode.See also2 Jumping to Another Playback Position in the Pattern [➙ 329]2 Jumping to another Playback Position in Your Project [➙ 777]7.1.7 Adjusting the Step Grid and the Nudge GridThe Step Grid defines regularly spaced-out timings (the “steps”) at which your events/notes canbe created, moved, etc. The Step Grid resolution corresponds to the step size, which directlyaffects the precision of all Pattern editing actions, including quantization (see ↑7.4.7, Quantiz-ing Events/Notes section for more on quantization).The Step Grid also affects the step sequencer on your controller: Increasing the StepGrid resolution (i.e. decreasing the step size) will make more steps available in your Pat-tern for placing events. See ↑7.4.2, Creating Events/Notes for more information on thestep sequencer.In the Pattern Editor, the Step Grid is indicated by the gray vertical lines in the Event area:Working with PatternsPattern BasicsMASCHINE - Manual - 336
