The Cymbal provides following engines:▪ Crash (default): ↑10.7.1, Cymbal – Crash.▪ Ride: ↑10.7.2, Cymbal – Ride.For more information on engines, see ↑10.1.1, Engines: Many Different Drums perDrumsynth. For general information on the Cymbals and the other Drumsynths, see↑10.1, Drumsynths – General Handling.10.7.1 Cymbal – CrashThe Crash engine creates a wide range of cymbals: from a typical 909-like crash to moreacoustic sounding timbres. Its parameters provide a great range of expression and spectral var-iation.The parameters described below are presented as they appear in the Control area (Ar-range view). The same parameters are available in the Plug-in panel within the Plug-inStrip (Mix view) — for more information please refer to section ↑9.4, The Plug-in Strip.Main PageElement DescriptionMAIN SectionEngine Selects the engine used in the Cymbal plug-in. Available enginesinclude Crash and Ride.Tune Adjusts the pitch of the drum played by the middle C, measured inMIDI note numbers and cents. Available values range from 0.00 to100.0% (default value is 30.0%).Decay Adjusts the duration of the sound’s tail, measured as a percentage.Available values range from 0.0 to 100.0% (default: 70.0%).Impact Adjusts the amount of click or initial attack, measured as apercentage. Available values range from 0.0 to 100.0% (default:70.0%).Using the DrumsynthsThe CymbalsMASCHINE - Manual - 600
