Nautel XR12 Troubleshooting Manual

Also see for XR12: Installation manual Operation and maintenance manual Preinstallation manual

Contents

XR12 Troubleshooting Manual Wiring/connector listsIssue 3.0 2009-07-28 Page 4-1Section 4: Wiring/connector listsThis section contains the wiring information for the hard-wired assemblies of the transmitter, andapplicable connector mating information.Wiring lists providedWiring lists are provided in tabular format. Table 4.1 on page 4-2 lists the tables containing wiringinformation. These tables provide non-printed wiring pattern, point-to-point (source and destination)interconnection information.Wiring lists not providedSeparate wiring lists are not provided for some assemblies, including:• Assemblies that have a separate maintenance manual. Refer to the appropriate maintenancemanual for detailed wiring information for these assemblies, if provided.• Assemblies that have their wiring information shown in tables on their assembly detail draw-ing(s). Refer to the Mechanical Drawings section of this manual for detailed wiring informationfor these assemblies.Connector mating informationWhere applicable, a connector mating table is provided after the corresponding wiring list. Table 4.2on page 4-2 identifies all provided connector information.Wire coloursEvery effort is made to manufacture assemblies using the wire colour shown in the Colour columnof the wiring list tables. Sometimes, a white wire will be substituted for the listed colour. In suchcases, wires must be identified by their assigned numbers.Printed wiring board patternsPrinted wiring pattern information for printed wiring boards (PWBs) is beyond the scope of thismanual, and therefore not provided.