64 Version 2.0Operator’s Manual WaypointUploading Waypoints from a Personal ComputerYou can use any terminal or communications program to download orupload waypoints and routes to or from the CDU and a PC.Set the PC to:4800 baud8 bits1 stop bitno parityno flow controlWhen sending data to the CDU, it must be sent in block form, followedby (with an appended) CR (carriage return) and LF (line feed). Normalcommunications programs, like Windows 3.1 or 3.11 Terminal are suf-ficient to get the job done. Unfortunately Windows 95 and new Win-dows O/S doesn’t provide a basic terminal emulation program; there-fore, a third party program is required with Windows 95 and abive.Using Windows Terminal, do the following (from the Program Man-ager):1. Connect the CDU’s port 2 RS-232 port to the PC’s communicationsport (Refer to the Installation & Service Manual).2. On the CDU press the CFG key until CFG1 screen is displayed.3. Scroll down the menu to WPL Input.4. Press the E key.5. Set the Transducer Connected to Yes.6. Set the Data Input Port No. to 2.7. Press the E key.
