Version 2.0 83Tide Operator’s Manualthe marker changes to a + sign. The marker will remain at the manuallypositioned mark until you either press one of the manual marker con-trol softkeys, or until you press the Marker to Now softkey - whichreturns the marker to automatic mode (indicated by the clock marker).The tide measurement units can be displayed in meters, feet, or fath-oms. Tide units are controlled along with depth units in the CFG1Depth screen.To select another port’s tide table, press the E function key, and usethe Change softkey to scroll down the list or the Go Back softkey toscroll up the list. You can also use the left and right cursor keys toscroll through the tide tables available in TIDE2.While in the edit mode, you can also move the cursor down to the dateand manually change it to any date you are interested in.Once you have found the table you need, press the E key again to loadthe table.TIDE2 - Tide Table Port ListTIDE2 is where you store the constants for the port tide tables you areinterested in. You can store up to 100 tide tables. The constants youneed can be derived from Part III of:Admiralty Tide Tables and Tidal Stream TablesPublished by the Hydrographer of the Navy,United KingdomHydrographic OfficeTauton, Somerset TA1 2DNUnited Kingdom+44-1823-337-900+44-1823-323-753 Fax46274 Telex
