Nedap uPASS Access Installation Manual

Also see for uPASS Access: Installation guide Installation guide

Contents

Nedap uPASS Access Installation Manual Manual pdf 14 page image

uPASS Access© Nedap AVI Page 14 of 19Example 2: Read only NXP UCODE tags (TID starts with E2006) and read 4 words from user memory.Figure 7: Read data example 25.2.2 DECODE NEDAP XSEnable decode Nedap XS formatted tags. Introduced in firmware version 2.54.Figure 8: Output settingsBy default the data on NEDAP XS formatted tags will be transmitted to the TRANSIT compatible processor or thethe NEDAP antenna modulation interface. In this case the UPASS will not perform any decoding.Enable decode Nedap XS when you do not want to use the TRANSIT compatible processor or the antennamodulation interface. The UPASS will decode the NEDAP XS tag data and output its plain tag-number. You canalso enable to output or verify the customer code.Enable the option 'Allow other tag formats' when you want the reader to support also other formatted tags, suchas NEDAP UHF Wiegand formatted tags and others.The decoded NEDAP XS output number contains:Byte 1: 4E NEDAP UHFByte 2: FMT=01: Nedap XS decoded hex tagnoFMT=02: Nedap XS decoded decimal tagno.Byte 3-4: 00 UnusedByte 5-7: CC CC=Customer code (zero if not transmitted)Byte 8-12: TAGNO TAGNO=Tag numberExamples:NEDAP UHF XS: Output: 4E10 3FFF C415 A87C BD51 8000NEDAP UHF XS decoded: Output: 4E01 0000 0000 0000 0000 3039NEDAP UHF XS decoded decimal: Output: 4E02 0000 0000 0000 0001 2345NEDAP UHF XS decoded + custcode: Output: 4E01 0000 0415 A000 0000 3039NEDAP UHF XS decoded decimal + custcode: Output: 4E02 0000 0415 A000 0001 2345

/ 19

This manual is suitable for:

uPASS Access

manualsdatabase

Your AI-powered manual search engine