Neo_M660 AT Command SetCopyright © Neoway Technology Co., Ltd 55OKRemarks The received data is displayed in char type by default.9.14 Setting Data TX/RX Type: +DATAFORMATDescription To set the TCP/UDP data TX/RX typeFormat AT+DATAFORMAT=, AT+DATAFORMAT?Parameter : Transmitted data type0: Transmitted data is displayed in hexadecimal ASCII code.1: Transmitted data is displayed in char type.: Received data type0: Hexadecimal ASCII code1: Char typeReturnValueSee the Example.Example AT+DATAFORMAT=0,0OKAT+DATAFORMAT=1,0OKAT+DATAFORMAT?+DATAFORMAT: 0,0OKRemarks The transmitted/received data is displayed in char type by default.9.15 Setting Data Receiving Mode: +TRANMODEDescription To set the TCP/UDP data receiving typeFormat AT+TRANMODE=Parameter :0: Original data without header, that is, transparent receiving mode1: Data with header, that is, non-transparent receiving modeReturnValueSee the Example.Example AT+TRANMODE=1 Set the receiving mode with data header
