Neo_M660 AT Command SetCopyright © Neoway Technology Co., Ltd 59ValueExample AT+UDPTRANS =220.199.66.56,6800OK+UDPTRANS:OKA UDP transparent transmission link isset up successfully.Remarks The UART does not display the data transmitted to the server after the transparenttransmission UDP link is set up successfully. Use +++ to switch the server to the command mode and ATO to switch it to the datamode. The module will exit from the transparent transmission link if a call or message isincoming. At most 4096-byte data can be sent or received in transparent transmission mode.9.22 Closing Transparent Transmission Link: +TRANSCLOSEDescription To close the transparent transmission linkFormat AT+TRANSCLOSEParameter N/AReturnValueSee the Example.Example AT+TRANSCLOSE+TRANSCLOSE: 0,OKQuit Transparent Success!!!A TCP transparent transmission link isclosed successfully.AT+TRANSCLOSE+TRANSCLOSE: 1,OKQuit Transparent Success!!!A UDP transparent transmission link isclosed successfully.Remarks N/A10 DNS Command10.1 Querying the IP Address: +DNSDescription To query the IP addressFormat AT+DNS=Parameter : The website URL to be queried, in form of www.xxxx.comReturnValueSee the Example.
