Neo_M660 AT Command SetCopyright © Neoway Technology Co., Ltd 83AT+CECALL=2OKSPEECH ONRemarks Derail information about eCall, please refer to TS 26.267.16.4 Triggering an MSD Transmission: %EMSDPUSHDescription IVS(In-Vehicle System) can trigger the MSD transmission after eCall is established. In thiscase, the IVS asks the PSAP to request a MSD transmissionFormat AT%EMSDPUSHParameter N/AReturnValueSee the Example.Example AT%EMSDPUSHOKRemarks IVS,MSD and PSAP are defined in TS 26.26716.5 eCall Indications:Description The indications about eCallFormat +EMSDPULL: PSAP start get pull data.+EMSDSYNC: SYNC frame detected start sending MSD.+EMSDLACK: link layer data transfer success(only sent when lower layer transfersuccess)+EMSDHACK: High layer data ack. Will send to AP no matter MSD transfer success orfail. (could be success or fail)->ecall session finish, depends on AP if Call need to be end.Parameter N/AReturnValueExampleRemarks16.6 eCall Commands ProcessDescription The process of eCall commandsFormat N/A
