Security 11-153To add a new user account, select Add User in the Security Options screen and press Return. The Add NameWith Write Access screen appears.Follow these steps to configure the new account:1. Select Enter Name and enter a descriptive name (for example, the user’s first name).2. Select Enter Password and enter a password.3. To accept the new name/password combination, select ADD NAME/PASSWORD NOW and press Return.To exit the Add Name With Write Access screen without saving the new account, select CANCEL. You arereturned to the Security Options screen.To delete a user account, select Delete User to display a list of accounts. Select an account from the list andpress Return to delete it. To exit the list without deleting the selected account, press Escape.Telnet accessTelnet is a TCP/IP service that allows remote terminals to access hosts on an IP network. The Netopia 4553supports Telnet access to its configuration screens.Caution!You should consider password-protecting or restricting Telnet access to the Netopia 4553 if you suspect thereis a chance of tampering.To password-protect the configuration screens, select Easy Setup from the Main Menu, and go to the EasySetup Security Configuration screen. By entering a name and password pair in this screen, all access via serial,Telnet, SNMP, and Web server will be password-protected.Add Name With Write AccessEnter Name:Enter Password (11 characters max):ADD NAME/PASSWORD NOW CANCEL
