Monitoring Tools 12-187Traffic StatisticsWhen ATM is the mode or Frame Relay is the datalink encapsulation, traffic statistics are available through theoption in the lower left corner. With other settings, this option is not available. To view the traffic statistics,select the option and press Return.A table of ATM VC Statistics (for ATM) or DLCI Statistics (for Frame Relay) appears. The table gives the followinginformation:DLCI or VPI/VCI: The DLCI number or virtual path or channel identifier, as you have configured itRemote IP Addr: For DLCIs, the remote IP network addressIPX Net: For DLCIs, the remote IPX network address, if anyLocal IP Addr: For VCs, the local IP network addressFrames Rx: The number of frames receivedFrames Tx : The number of frames transmittedBytes Rx: The number of bytes receivedBytes Tx : The number of bytes transmittedSystem InformationThe System Information screen gives a summary view of the general system level values in the Netopia 4553.From the Statistics & Logs menu select System Information. The System Information screen appears.The information display varies by model, firmware version, feature set, and so on. You can tell at a glance yourparticular system configuration.System InformationSerial Number ff-70-00 (16740352)Firmware Version 50d70Processor Speed (MHz) 50Flash ROM Capacity (MBytes) 2DRAM Capacity (MBytes) 16Ethernet Single 10/100 PortWAN Interface ATM SDSL
