Netopia 4741 2A4NA Administration Manual

Also see for 4741: Specifications

Contents

Netopia 4741 2A4NA Administration Manual Manual pdf 22 page image

3-2 Administration GuideConfiguring TCP/IP on Windows-based ComputersConfiguring TCP/IP on a Windows computer requires the following: An Ethernet card (also known as a network adapter) The TCP/IP protocol must be “bound” to the adapter or cardDynamic configuration (recommended)To configure your PC for dynamic addressing do the following:Note: You can also use these instructions to configure other computers on your network to accept IP addressesserved by the Netopia 4741.1. Go to the StartMenu/Settings/ControlPanels and double clickthe Network icon. Fromthe Network componentslist, select theConfiguration tab.2. Select TCP/IP-->Your Network Card. Then selectProperties. In the TCP/IP Properties screen, select the IPAddress tab. Click “Obtain an IP Address automatically”.3. Click on the DNS Configuration tab. Click Disable DNS.DNS will be assigned by the router with DHCP.Click on the Gateway tab, and if there is an installedgateway, remove it.4. Click OK in this window and the next window. Whenprompted, reboot the computer.