Easy Setup 6-7Easy Setup ProfileThe Easy Setup Profile screen is where you configure the parameters that control the Netopia 4741’sconnection to a specific remote destination, usually your ISP or a corporate site.On a Netopia 4741 ADSL Integrated Access Device you can add up to 15 more connection profiles, for a total of16, although, except for Virtual Private Networks, you can only use one at a time.1. To enable address translation, toggle Address Translation Enabled to Yes (the default). For moreinformation on Network Address Translation, see Chapter 9, “IP Setup,” on page 9-1.The IP Addressing menu item allows you to choose between Unnumbered and Numbered addressing.Numbered is the default for DSL. It assigns a unique IP address to the DSL WAN interface, as required bymost ISPs’ routers. Unnumbered may be used for simpler configurations such as point-to-point short haulapplications.2. Select the editable field labeled Local WAN IP Address.The default address is 0.0.0.0, which allows for dynamic addressing, when your ISP assigns an addresseach time you connect. However, you can enter another specific address if you want to use staticaddressing. In that case, enter the local WAN address your ISP gave you. Press Return.3. If you selected PPP data link encapsulation in the DSL Line Configuration screen, a PPP Authenticationmenu item appears. The authentication protocol and user name/password combinations you enter mustbe assigned or agreed to in advance between you and your ISP. Select PPP Authentication and pressReturn.From the pop-up menu that appears, select the authentication method your ISP uses: PAP (PasswordAuthentication Protocol), CHAP (Challenge Handshake Authentication Protocol), or None. PAP is the most common, and requires you to enter a User Name and Password in the next two fields. CHAP requires you to enter a Host Name and Secret in the next two fields.4. Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.Connection Profile 1: Easy Setup ProfileConnection Profile Name: Easy Setup ProfileAddress Translation Enabled: YesIP Addressing... NumberedLocal WAN IP Address: 0.0.0.0Local WAN IP Mask: 0.0.0.0PREVIOUS SCREEN NEXT SCREENReturn accepts * ESC cancels * Left/Right moves insertion point * Del deletes.Enter basic information about your WAN connection with this screen.