206nStorageIf the camera will not be used for an extended period, removethe battery and store it in a cool, dry area with the terminal coverin place. To prevent mold or mildew, store the camera in a dry,well-ventilated area. Do not store your camera with naphtha orcamphor moth balls or in locations that:• are poorly ventilated or subject to humidities of over 60%• are next to equipment that produces strong electromagneticfields, such as televisions or radios• are exposed to temperatures above +50 °C (122 °F) or below –10 °C(14 °F)CleaningDo not use alcohol, thinner, or other volatile chemicals.Storage and CleaningCamera bodyUse a blower to remove dust and lint, then wipe gently witha soft, dry cloth. After using the camera at the beach or sea-side, wipe off sand or salt with a cloth lightly dampened indistilled water and dry thoroughly. Important: Dust or otherforeign matter inside the camera may cause damage not cov-ered under warranty.LensLenses are easily damaged. Remove dust and lint with ablower. If using an aerosol blower, keep the can vertical toprevent the discharge of liquid. To remove fingerprints andother stains, apply a small amount of lens cleaner to a softcloth and clean with care.MonitorRemove dust and lint with a blower. When removing finger-prints and other stains, wipe the surface lightly with a softcloth or chamois leather. Do not apply pressure, as thiscould result in damage or malfunction.Dust shield The dust shield is easily damaged. Remove dust and lintwith a blower.
