Nikon 4 User Manual

Also see for 4DIF: Instruction manual

Contents

Nikon 4 User Manual Manual pdf 46 page image

42Image Adjustment2 Turn the Apply button on ( )Turn the Apply button on ( ) to enable Image Dust Off.3 Click Change...Click Change... to select a reference image for Image Dust Off. Image Dust Off will beperformed when the image is selected. The date of creation of the selected file will bedisplayed under “Dust Off ref photo was taken at” in the Image Dust Off tool palette.Image Dust OffImage Dust Off compares RAW photographs with a reference image created with the samecamera to reduce the effects of any dust that may be present on the low-pass filter protectingthe camera’s imaging sensor.Image Dust OffImage Dust Off can be performed on RAW images only. If the image in the active window is JPEG or TIFF,the Apply button in the Image Dust Off palette will be grayed out and inactive.Cameras That Support Image Dust-OffThe following cameras support Image Dust Off: D2-series cameras, D1X / D1H (firmware version 1.10 orlater), D200, D100, D70s, D70, and D50. Image Dust Off is not supported with COOLPIX cameras, D1cameras, or with earlier versions of the camera firmware for the D1X and D1H .Reference ImagesThe position and amount of dust on the low-pass filter may change. If possible, take reference imagesregularly and use a reference image taken within one day of the selected photograph.Settings menuApply buttonImage Dust OffImage Dust Off only affects relatively featureless areas of the image.1 Display the Image Dust Off paletteSelect the tool palette containing the Image Dust Off palette from the View menu (thedefault location for the Image Dust Off palette is Tool Palette 2) and click the triangle atthe top left corner of the palette.Before Image Dust Off After Image Dust Off