39Using A (Auto) ModeShooting FeaturesOptions Available in the Auto Shooting MenuIn A (auto) mode, the following options can bechanged.C Functions That Cannot Be Used SimultaneouslyThere are functions with which these settings cannot be enabled (A66).On the A (Auto) mode shooting screen M Tap the d tab (A11)Option Description AA Image modeAllows you to select the combination of image size andimage quality used when saving images (A64).The default setting is P 4608×3456.This setting is applied to other shooting modes.64q/s/r TouchshootingSelect between Touch shutter (default setting), whichallows you to release the shutter by tapping the monitor,Touch AF/AE, which allows you to set the focus area bytapping the monitor, and Subject tracking, whichmoves the focus area to track the registered subject.E35X ISO sensitivityHigher ISO sensitivity allows you to take pictures of darkersubjects. Additionally, even with subjects of similarbrightness, images can be taken at faster shutter speeds,and blurring caused by camera shake and subjectmovement can be reduced. When ISO sensitivity is set toAuto (default setting), the camera sets the ISO sensitivityautomatically.E42V ContinuousAllows you to select from continuous settings of Single,Continuous, BSS (A47), or Multi-shot 16. The defaultsetting is Single (i.e., only one image is captured at atime). In Continuous, while the shutter-release button isheld down, up to 6 images are taken at a rate of about 1.3frames per second (fps) when Image mode is set toP 4608×3456.E43W White balanceAllows you to adjust the colors in the image to suit thelight source, which can make colors appear as they do tothe eye. Although Auto (default setting) can be usedunder most types of lighting, white balance can beadjusted to suit the sky conditions or light source andachieve more natural color tones in the image.Set the flash mode (A55) to c (Off) when whitebalance is set to any setting other than Auto and Flash.E44
