Nikon COOLPIX S6 User Manual

Contents

70Wireless Transfer and PrintingConnecting to the NetworkAfter creating a network profile, you can connect to the network by selecting theprofile from a list. Turn the camera on, select shooting mode, and follow the stepsbelow:* To view settings for the selected profile, press the zoom control to T ( ). If you are unableto connect, check these settings to make sure they match those used on the network. Ifthe last session with the selected device did not terminate normally, the camera will brieflydisplay a message stating that the session is now complete.Auto Power OffWhile the camera is in (wireless) mode, data transmission will continue after the cameramonitor turns off to save power (auto power off ; 88).1Display shooting mode menu.2Highlight .3 CHOOSE PROFILEConfirm InfoProfile-BProfile-CProfile-A1/2Display profile list.4 CHOOSE PROFILEConfirm InfoProfile-BProfile-CProfile-A1/2Highlight profile.*5 WIRELESS MENUShooting DateShoot & TransferSelected ImagesEasy Transfer (PM)Easy Trans. (no PM)Confirm Help1/2 Select profile. † If network profile is selected,wireless transfer menu shown at left will bedisplayed when connection is established.If printer profile is selected, wireless printermenu will be displayed ( 73).† To select another profile, repeat Steps 1–5.